Stop scratches, cuts, and gouges from:
Sheets, anchor, dock, and mooring lines
Fishing poles & trapping gear
Foot traffic and other general wear
Protect fiberglass, wood, metal, and plastic surfaces
Made of durable 316 Marine Grade Stainless Steel
Installs in Minutes, Protects For Years
Proudly Made in the USA
“The No-Wear Guard wins hands down on the durability front...”
Unlike some chafe guards that are attached or wrapped on lines , No-Wear Guard Chafe Guards are installed in place and stay there.
Never worry about mooring, anchor, or fender lines moving your chafe guards away from what they’re protecting. No-Wear Guard’s high strength adhesive will keep it in place for years to come on almost any boating surface you have.
Installed in minutes, protection for years.
Unlike anti-chafe tapes and soft line covers, No-Wear Guards are made of 316 Stainless Steel. This helps make No-Wear Guards nearly indestructible from abrasion and rubbing damage. We’ve even had customers report their original No-Wear Guards lasting over 10 years before need a replacement!
No-Wear Guard has spent years designing the industry's finest marine chafe guard. Made by boaters for boaters, the No-Wear guard is your boat or yacht's best protection from line and sheet damage before it starts. Prevent unsightly scratches and cuts and the need for expensive and timely repairs. Install a No-Wear Guard today.
Unprotected fiberglass topside suffering from line damage
Without protection, wood, fiberglass, plastic, and gelcoat surfaces can be damaged over time. This can damage the surface of your vessel leading to unsightly scratches, gouges, and cuts that can be more than cosmetic.
Vessel damage can come from:
Lines & sheets (impacting topsides and head foils)
Dock, anchor, and mooring lines
Fishing poles and related equipment
Foot traffic in high use areas such as cockpits and entry / exit points
If left untreated the damage can be more than an eyesore. Repairs to fiberglass, wood, and other surfaces and time consuming and expensive.
Stop the problem before it begins. Install a No-Wear Chafe Guard today.
Protected topside with a No-Wear Guard Chafe Guard
Using a No-Wear Guard chafe guard on your vessel can prevent scratches and gouges from routine use. It can even be applied over already rough surfaces to prevent additional damage (as well as provide a neater appearance).
The No-Wear guard has been tested in fresh and blue water conditions, on steel, fiberglass, wood, and gelcoat surfaces. To prevent to your pride and joy - install the No-Wear Guard today!
Specifications:
Available in 6"x2" or 9"x2" sizes (152mm x 50mm) or (228mm x 50mm)
Constructed of marine grade Type 316 Stainless Steel
Environmentally resistant adhesive effective from -40F to +450F (-40C to +232C)
Suitable on most surfaces including fiberglass, wood, steel, aluminum, and plastic
Will not wear-out like plastic, rubber, and other chafe guard solutions
Check out Graham Snook’s comparison of various anti-chafe solutions, including the No-Wear Guard.
Coverage of the No-Wear chafe guard and its industry leading qualities - including our marine grade 316 stainless steel to our aircraft quality adhesive.
Don’t let wear damage from mooring lines, dock lines, anchor lines, and sheets damage your vessel. No-Wear chafe guards are designed to protect your boat’s surface from damaging rubbing and abrasion.
Small damage can lead to big damage over time. No-Wear chafe guards can help stop existing damage and prevent it spreading.
No-Wear Guards can be applied to more than just topside surfaces. Head foils, booms, cockpits, and any other surface can be protected with No-Wear Guard.
The No-Wear Chafe Guard can be installed in minutes on flat or radial surfaces and on a number of materials - including steel, fiberglass, wood, and gelcoats.
“Installed in Minutes, Protection For Years”
Flat Surface Installation
Clean all surfaces well
Optionally fill dents and sand smooth (for best results)
Removing the adhesive backing tape and adhere to No-Wear Chafe Guard in place
Firmly burnish all edges
For best results, apply a small bead of silicon around all edges
Once applied the No-Wear Guard cannot be repositioned
Radial Installation
Gently pre-form the No-Wear Chafe Guard to the desired curved shape prior to removing the backing tape
Clean all surfaces well
Optionally fill dents and sand smooth (for best results)
Removing the adhesive backing tape and adhere to No-Wear Chafe Guard in place
Firmly burnish all edges
For best results, apply a small bead of silicon around all edges
The No-Wear Chafe Guard can only be installed with a single curve (e.g. do not install with multiple bends)
Once applied the No-Wear Guard cannot be repositioned
No-Wear Guard’s Custom Shop
Do you have unique requirements for your sailing, racing, or fishing vessel? No-wear Guard can meet your need.
No-Wear Guard products can be made 'to order' in any length to satisfy any application.
Customer order options include:
Manufactured with or without adhesive backing
In any length to meet your specific needs (from 10" to over 100")
Available in our standard 2" (50.8mm) width
Prices starting at $1.99 / inch
