Instructions

The No-Wear Chafe Guard can easily be applied to flat or radial surfaces on a number of surfaces - including steel, fiberglass, wood, and gelcoats. 

 Flat Surface Installation

Flat Surface Installation

Flat Surfaces

  • Clean all surfaces well
  • Optionally fill dents and sand smooth (for best results)
  • Removing the adhesive backing tape and adhere to No-Wear Chafe Guard in place
  • Firmly burnish all edges
  • For best results, apply a small bead of silicon around all edges
  • Once applied the No-Wear Guard cannot be repositioned
 Radial Installation

Radial Installation

Radial Surfaces

  • Gently pre-form the No-Wear Chafe Guard to the desired curved shape prior to removing the backing tape
  • Clean all surfaces well
  • Optionally fill dents and sand smooth (for best results)
  • Removing the adhesive backing tape and adhere to No-Wear Chafe Guard in place
  • Firmly burnish all edges
  • For best results, apply a small bead of silicon around all edges
  • The No-Wear Chafe Guard can only be installed with a single curve (e.g. do not install with multiple bends)
  • Once applied the No-Wear Guard cannot be repositioned